February 17, 2006
February 19, 2006
 |
February 20, 2006: Tall Cabinet Carcass Glued Up and wood for Loose Cigar
Cabinet setting up for glue-up tomorrow....
February 22, 2006
February 26, 2006...........Ooops!
March 3, 2006
March 6, 2006
 
April 17, 2006: Openings between
cabinets being created for 'air flow' and corner blocking used to reinforce all
miter joints.
April 18, 2006: Air circulation vents to balance humidity evenly throughout
Humidor. All vents to have fans that are regulated by both the Sensor for
the RH and/or the separate Air Re-circulation fan timer circuit.....
April 30, 2006: Reveal changed to 3/4" and views of door edges getting 'dressed'
to conceal Spanish Cedar Edges
  
  
  
May 2, 2006
Rears of door have had edging completed and are almost ready for setting into
the cabinet,
May 26, 2006
May 28, 2006: Interior linings and air passages completed and drawer glides
positioned for drawers/shelving [yet to be built]
June 6, 2006: Doors hung and interior drawers now being completed
June 7, 2006
June 13, 2006: all doors and pull outs made and installed.
June 14, 2006:Tall door handles and loose cigar drawer handles competed and
fitted
June 20, 2006: Handles affixed.....
June 25, 2006: Humidifier in base being made.....
July 9, 2006: preliminary testing and adjusting of Humidification to be sure
the Humidity is even in all three areas
July 24, 2006: All doors and drawers 'sealed' to retain Humidity:
July 25, 2006: Details of Humidifier Drawer handle and
mitered corners of base
  
Note: Mitered corners will be 'dressed' to make joint line virtually
imperceptible
August 1, 2006
August 6, 2006
August 15, 2006
#1
#2
#3
#4
#5
 #6
#7
 #8
#9
 #10
#11
 #12
#13
 #14
#15
August 29, 2006
October 29, 2006
>Reveal at door tops
reduced as desired and corners 'sharpened'
 
>New top fabricated
> Drawer faces removed and handles
removed for new design
>Accessory cabinet door with flutes removed and handle removed for redesign
>Door to controller redesigned
|
