|
11,27,2010: Veneer for sides of cabinet
Click to view Video
12,02,10 Cabinet 'shell' under construction
12,07,10 Face frame fabricated and installed on 'carcass'
12,14,10: Crown molding made and internal framing for drawer glide supports
completed
1,12,11: fully lined with rear panel in place; flutes and plinths fabricated
as discussed
1/16/11: Drawers almost completed
 
1/21/11 Barrister Door installed, drawer faces fitted and veneer bookmatched
for the 8 mid drawer faces
1/23/11: Applying veneer onto the 8 middle drawers to retain original
alignment
Assembly in vacuum press being laminated
Assemblage removed from vacuum press
Drawer faces all separated
Assembled Cabinet
Drawer face video
2/3/11: Initial 'test' of Humidifier [seals yet to be installed and glass yet
to be installed]
2/6/11 Mock-up of display shelf using cardboard
03.02,11 Display shelf made with slits to position retainers to hold display
boxes as desired:
3/4/11: views of Electronics and air flow design
3/9/11: views of Humidifier......+/- 1.5 gallon capacity
3/13/11: Custom made Mahogany Handles fitted onto drawers
3,21,11; Shows Cross Flow fans in each corner of the Cabinet and drawer
glides spaced away from the sides of the cabinet for air flow
3/22/11: Final Photos
|
