|
1. Cost: $7500.00 + Shipping
[with Digital Electronic Humidification]
2. Size:
3. Exterior Materials: Shell/carcass to be 3/4" panel [1/2" Baltic Birch
Plywood with 1/4" Spanish Cedar Veneer]
4. Interior Design and Materials: shelving/trays to be Genuine Mahogany
- all drawers made of 1/2" thick solid mahogany
- all corners corners to be half blind dovetailed
- all drawer and trays to be 'pull out' using full extension 100# rated file
cabinet grade drawer glides
- 2 upper drawers [+/- 2" tall] for loose cigar storage; each
to have both fixed and 'felt bumpered' moveable dividers
with floor of diagonally mounted slats for ventilation
3 lower drawers for boxed cigar storage with 1/4" thick mahogany plywood
floor
bottom drawer for humidifier and controls
control to be recessed into lowest drawer face
drawer faces to be made oversized to conceal drawer glide
edges
'seal' to be installed in face edge of carcass/shell so as
to 'close' against rear side of door; seal to be of 'pile' weather-strip.
access door on rear wall for electrical connections
wiring exiting humidor to be sealed with silicon
clearance for stop pin for Espangnolete lock from Hafele to be provided
below lowest drawer and above upper drawer
Overall design to be similar to the below
7. Humidifier: Artisan Humidifier
http://www.arlinliss.com/__Humidor_Controls/Humistat/Artisan.htm
8. Finish: finely sanded raw wood
9. Start / Completion : ready for delivery by 12/16/06
10. Payment: 50% with
order and balance when ready for delivery |
11/15/06... original sketches

11/16/06....marked up with notes
11/21/06 more notes

11/23/06


11/25/06




  
11,27,06


 12,8,06


12,10,06

|