[a] 'Slip in' Multiple drawered unit for the storage of fresh produce in an 'under the countertop' kitchen cabinet [to be made by others]
[b] Unit to be sized to fit into an opening of 28" width 24" depth and 18" height [per drawings provided]
[c] Unit to be able to maintain 15 degree temperature differential between ambient and interior

[d] Unit to have interior side walls rear wall and ceiling lined with Vacuum Panel insulation providing R30 in 1" thickness panels insulating it from surrounding appliances

[e] Interior drawers to be made of Plexiglas to mutually agreed design and configuration

[f] Humidity to be able elevated to 85% RH

[g] AC and RH control to be regulated by Artisan Controller with Humidifier/Power supply and Peltier AC unit sized to suit

[h] 'shell' of unit to be of 1/2" Baltic birch plywood [exterior sides, ceiling rear wall and floor] with interior of Plexiglas or other material to mutual agreement

[i] Finished drawer faces of same materials as external cabinetry fitted with sealing media to retain RH and TEMP as desired per above

[j] 110VAC power outlet to be provided for my unit to plug into for  24VDC power being supplied by my converter/power supply

[k] Manual periodic water refilling and wick replacement is required by you [controller with provide visual and or audible notice of need for water refills]
[l] Wick to be installed in Humidifier and will need manual replacement every 6 months
[m] exterior face edge of appliance to be oversized to fill void between cabinet and appliance; to be sized to slip in to opening precisely; no blocking or shimming to be needed [only 'edge banding' needs to be applied to cabinet] depth to be sized to maximize space available, assure adequate air flow and align appliance to edge-banded sides of cabinet ready for door face installation without additional blocking
[n] drawer faces to have a 'flange' around each drawers face to allow your mill worker to apply drawer faces matching all other cabinetry
[o] Appliance to be self supporting and self centering; 2.5" cleats to be affixed to interior sides of casework by mill worker for appliance to rest upon; ductwork to be suspended above on plywood divider separating warming drawer from below and to be installed before sliding in appliance.